• Whatsapp: 0086-13455283042
Home > Product > Industrial Mixer > V Mixer

Pharmaceutical Powder Mixer

Pharmaceutical Powder Mixer
V mixer for powder is suitable for the mixing of the powder and granular bodies with good material flowability and small difference in physical properties, and the mixing of materials with short mixing time requirements and requiring short mixing time. Because the material flow in the V-shaped mixing container is stable, the original shape of the material will not be damaged. Therefore, the V-type mixer is also suitable for the mixing of fragile, easily-abrasive granular materials, or the mixing of finer particles, blocks, and materials containing a certain amount of moisture, and is widely used in the pharmaceutical, chemical, food, and other industries.
Product Details:


V-type mixer series products are high-efficiency asymmetric mixers, which are suitable for the mixing of powder or granular materials in the chemical, food, medicine, feed, ceramics, metallurgy and other industries. The structure of the machine is reasonable, simple, operation is closed, and the material is convenient for feeding and discharging. The cylinder (manual or vacuum feeding) is made of stainless steel and is easy to clean. It is one of the basic equipments of the company.

One end of the machine is equipped with a motor and a speed reducer, and the motor power is transmitted to the speed reducer through a belt. The speed reducer is then transmitted to the V-type bucket through the coupling. The V-bucket is continuously operated to drive the material in the bucket to be mixed in the bucket up, down, left, and right.

1, before use, an empty test run shall be conducted. Before the test run, the degree of sturdiness of all connecting parts of the horizontal V-type mixer, the amount of lubricant oil in the reducer and the integrity of the electrical equipment shall be checked, and then the main switch shall be closed. Turn on the power supply and run a free run.

2. Installation: Place the machine steadily, install the machine foot, and flatten it so that the mechanical energy can run freely.

3. Before use, add oil to the refueling point, and then carry out the no-load operation. Check whether the fasteners are loose, whether the electrical is normal, whether the mechanical operation is normal, and if any abnormalities, rectify and debug.

4. Turn the feeding port to the top and open the feeding cap to feed. The feeding amount must not exceed the specified volume. Then close the feeding cap and start the machine to run. If any abnormality is found during the process, the machine must be shut down for inspection.

5, after work or change the variety must be clean inside and outside the hopper.


Hot Tags: pharmaceutical powder mixer, China, manufacturers, suppliers, factory, high quality, hot sale
Related Products